各位老铁们,大家好,今天由我来为大家分享c语言错误提示大全,以及c语言遇到的问题总结的相关问题知识,希望对大家有所帮助。如果可以帮助到大家,还望关注收藏下本站,您的支持是我们最大的动力,谢谢大家了哈,下面我们开始吧!
一、C语言编程出现的致命错误
1、scanf()中不能出现非变量的文字,你前面写上“please enter a number:"和后面的”\n“都是错误的。建议你把输入的那一句改成下面两句:
printf("Please Enter a Number:");
2、你在声明中变量a的类型是int,但在输入时你又写成了%f,二者类型不一致,出现错误。建议要么前面声明为float a;要么后面打印的地方改成%d,二处必改之一处才行。
以上两点都会使你的程序出现致命错误。
二、C语言只是:请找出下面代码中的所有错误
1、缺少头文件stdio.h否则无法printf
2、缺少头文件malloc.h否则无法申请动态内存
3、(2)main()//后面return 0;这里应该是 int main()
4、(7) dest=(char*)malloc(len);//这里要是len+1否则无法容纳最后的结束符\0
5、(9) char* s=&src[len-1];//src[len]是char类型,不能赋值给char*类型的s要指向地址减1为了不把结束符直接赋值给dest第一位
6、(11)*d++=*s--;//赋值操作的做操作数不能是 d++需要指针相互赋值
7、 free(dest);//释放动态申请内存不解释
8、可以区分那些是真正老师出的题那些是不规范
9、老师出的题目是考察 7行 9行 11行和 12 13之间的free
三、C语言错误提示
1、Ambiguous operators need parentheses-----------不明确的运算需要用括号括起
2、Ambiguous symbol''xxx''----------------不明确的符号
3、Argument list syntax error----------------参数表语法错误
4、Array bounds missing------------------丢失数组界限符
5、Array size toolarge-----------------数组尺寸太大
6、Bad character in paramenters------------------参数中有不适当的字符
7、Bad file name format in include directive--------------------包含命令中文件名格式不正确
8、Bad ifdef directive synatax------------------------------编译预处理ifdef有语法错
9、Bad undef directive syntax---------------------------编译预处理undef有语法错
10、Bit field too large----------------位字段太长
11、Call of non-function-----------------调用未定义的函数
12、Call to function with no prototype---------------调用函数时没有函数的说明
13、Cannot modify a const object---------------不允许修改常量对象
14、Case outside of switch----------------漏掉了case语句
15、Case syntax error------------------ Case语法错误
16、Code has no effect-----------------代码不可述不可能执行到
17、Compound statement missing{--------------------分程序漏掉"{"
18、Conflicting type modifiers------------------不明确的类型说明符
19、Constant expression required----------------要求常量表达式
20、Constant out of range in comparison-----------------在比较中常量超出范围
21、Conversion may lose significant digits-----------------转换时会丢失意义的数字
22、Conversion of near pointer not allowed-----------------不允许转换近指针
23、Could not find file''xxx''-----------------------找不到XXX文件
24、Declaration missing;----------------说明缺少";"
25、Declaration syntax error-----------------说明中出现语法错误
26、Default outside of switch------------------ Default出现在switch语句之外
27、Define directive needs an identifier------------------定义编译预处理需要标识符
28、Division by zero------------------用零作除数
29、Do statement must have while------------------ Do-while语句中缺少while部分
30、Enum syntax error---------------------枚举类型语法错误
31、Enumeration constant syntax error-----------------枚举常数语法错误
32、Error directive:xxx------------------------错误的编译预处理命令
33、Error writing output file---------------------写输出文件错误
34、Expression syntax error-----------------------表达式语法错误
35、Extra parameter in call------------------------调用时出现多余错误
36、File name too long----------------文件名太长
37、Function call missing-----------------函数调用缺少右括号
38、Fuction definition out of place------------------函数定义位置错误
39、Fuction should return a value------------------函数必需返回一个值
40、Goto statement missing label------------------ Goto语句没有标号
41、Hexadecimal or octal constant too large------------------16进制或8进制常数太大
42、Illegal character''x''------------------非法字符x
43、Illegal initialization------------------非法的初始化
44、Illegal octal digit------------------非法的8进制数字
45、Illegal pointer subtraction------------------非法的指针相减
46、Illegal structure operation------------------非法的结构体操作
47、Illegal use of floating point-----------------非法的浮点运算
48、Illegal use of pointer--------------------指针使用非法
49、Improper use of a typedefsymbol----------------类型定义符号使用不恰当
50、In-line assembly not allowed-----------------不允许使用行间汇编
51、Incompatible storage class-----------------存储类别不相容
52、Incompatible type conversion--------------------不相容的类型转换
53、Incorrect number format-----------------------错误的数据格式
54、Incorrect use of default--------------------- Default使用不当
55、Invalid indirection---------------------无效的间接运算
56、Invalid pointer addition------------------指针相加无效
57、Irreducible expression tree-----------------------无法执行的表达式运算
58、Lvalue required---------------------------需要逻辑值0或非0值
59、Macro argument syntax error-------------------宏参数语法错误
60、Macro expansion too long----------------------宏的扩展以后太长
61、Mismatched number of parameters in definition---------------------定义中参数个数不匹配
62、Misplaced break---------------------此处不应出现break语句
63、Misplaced continue------------------------此处不应出现continue语句
64、Misplaced decimal point--------------------此处不应出现小数点
65、Misplaced elif directive--------------------不应编译预处理elif
66、Misplaced else----------------------此处不应出现else
67、Misplaced else directive------------------此处不应出现编译预处理else
68、Misplaced endif directive-------------------此处不应出现编译预处理endif
69、Must be addressable----------------------必须是可以编址的
70、Must take address of memory location------------------必须存储定位的地址
71、No declaration for function''xxx''-------------------没有函数xxx的说明
72、No stack---------------缺少堆栈
73、No type information------------------没有类型信息
74、Non-portable pointer assignment--------------------不可移动的指针(地址常数)赋值
75、Non-portable pointer comparison--------------------不可移动的指针(地址常数)比较
76、Non-portable pointer conversion----------------------不可移动的指针(地址常数)转换
77、Not a valid expression format type---------------------不合法的表达式格式
78、Not an allowed type---------------------不允许使用的类型
79、Numeric constant too large-------------------数值常太大
80、Out of memory-------------------内存不够用
81、Parameter''xxx'' is never used------------------能数xxx没有用到
82、Pointer required on left side of->-----------------------符号->的左边必须是指针
83、Possible use of''xxx'' before definition-------------------在定义之前就使用了xxx(警告)
84、Possibly incorrect assignment----------------赋值可能不正确
85、Redeclaration of''xxx''-------------------重复定义了xxx
86、Redefinition of''xxx'' is not identical------------------- xxx的两次定义不一致
87、Register allocation failure------------------寄存器定址失败
88、Repeat count needs an lvalue------------------重复计数需要逻辑值
89、Size of structure or array not known------------------结构体或数给大小不确定
90、Statement missing;------------------语句后缺少";"
91、Structure or union syntax error--------------结构体或联合体语法错误
92、Structure size too large----------------结构体尺寸太大
93、Sub scripting missing ]----------------下标缺少右方括号
94、Superfluous& with function or array------------------函数或数组中有多余的"&"
95、Suspicious pointer conversion---------------------可疑的指针转换
96、Symbol limit exceeded---------------符号超限
97、Too few parameters in call-----------------函数调用时的实参少于函数的参数不
98、Too many default cases------------------- Default太多(switch语句中一个)
99、Too many error or warning messages--------------------错误或警告信息太多
100、Too many type in declaration-----------------说明中类型太多
101、Too much auto memory in function-----------------函数用到的局部存储太多
102、Too much global data defined in file------------------文件中全局数据太多
103、Two consecutive dots-----------------两个连续的句点
104、Type mismatch in parameter xxx----------------参数xxx类型不匹配
105、Type mismatch in redeclaration of''xxx''---------------- xxx重定义的类型不匹配
106、Unable to create output file''xxx''----------------无法建立输出文件xxx
107、Unable to open include file''xxx''---------------无法打开被包含的文件xxx
108、Unable to open input file''xxx''----------------无法打开输入文件xxx
109、Undefined label''xxx''-------------------没有定义的标号xxx
110、Undefined structure''xxx''-----------------没有定义的结构xxx
111、Undefined symbol''xxx''-----------------没有定义的符号xxx
112、Unexpected end of file in comment started on line xxx----------从xxx行开始的注解尚未结束文件不能结束
113、Unexpected end of file in conditional started on line xxx----从xxx开始的条件语句尚未结束文件不能结束
114、Unknown assemble instruction----------------未知的汇编结构
115、Unknown option---------------未知的操作
116、Unknown preprocessor directive:''xxx''-----------------不认识的预处理命令xxx
117、Unreachable code------------------无路可达的代码
118、Unterminated string or character constant-----------------字符串缺少引号
119、User break----------------用户强行中断了程序
120、Void functions may not return a value----------------- Void类型的函数不应有返回值
121、Wrong number of arguments-----------------调用函数的参数数目错
122、''xxx'' not an argument----------------- xxx不是参数
123、''xxx'' not part of structure-------------------- xxx不是结构体的一部分
124、xxx statement missing(-------------------- xxx语句缺少左括号
125、xxx statement missing)------------------ xxx语句缺少右括号
126、xxx statement missing;-------------------- xxx缺少分号
127、xxx'' declared but never used-------------------说明了xxx但没有使用
128、xxx'' is assigned a value which is never used----------------------给xxx赋了值但未用过
129、Zero length structure------------------结构体的长度为零
关于c语言错误提示大全到此分享完毕,希望能帮助到您。